Skip to content
Fleks
Liquid-Tight Conduit Fitting

Images are for illustration; refer to the table for dimensions.

Conduit Fittings

Liquid-Tight Conduit Fitting

IP67 straight male fitting for liquid-tight conduit, in fixed and swivel types.

  • IP67
  • −45 °C / +105 °C
  • M12–M63
  • CE
  • External type, for outdoor use
  • Fixed or swivel body
  • Body and cap nut in nickel-plated brass
  • O-ring: NBR (nitrile rubber)
  • Clamping insert PA6, sealing ring TPV, ring polyethylene
  • Ferrule: aluminium or galvanized

Technical data

Operating temperature
−45 °C / +105 °C
Protection rating
IP67
Material
Nickel-plated brass
Liquid-tight
Yes
Size range
M12–M63
Certificates
CE

About this product

The liquid-tight conduit fitting is an IP67 straight male fitting for Liquid-Tight PVC-Jacketed Steel Conduit, its halogen-free jacketed type and Liquid-Tight Steel-Braided Conduit, so the run stays sealed at the connection too. It is an outdoor type and works from −45 °C to +105 °C. Body and cap are nickel-plated brass, the cap seal PA6 and the gasket TPV. It comes in fixed and swivel types with NPT, metric and PG threads.

Size table

The + button at the start of a row adds that size to your quote list. You set the quantity on the quote page.

Fixed type9 sizes

Liquid-Tight Conduit Fitting, Fixed type: size table
Item codeNPTMetricPGConduit size
F.09.1007—M12×1.5Pg 710
F.09.10091/4"M16×1.5Pg 912
F.09.10113/8"M16×1.5Pg 1116
F.09.10161/2"M20×1.5Pg 1620
F.09.10213/4"M25×1.5Pg 2125
F.09.10291"M32×1.5Pg 2932
F.09.10361 1/4"M40×1.5Pg 3640
F.09.10421 1/2"M50×1.5Pg 4250
F.09.10482"M63×1.5Pg 4863

Swivel type9 sizes

Liquid-Tight Conduit Fitting, Swivel type: size table
Item codeNPTMetricPGConduit size
F.09.2007—M12×1.5Pg 710
F.09.20091/4"M16×1.5Pg 912
F.09.20113/8"M16×1.5Pg 1116
F.09.20161/2"M20×1.5Pg 1620
F.09.20213/4"M25×1.5Pg 2125
F.09.20291"M32×1.5Pg 2932
F.09.20361 1/4"M40×1.5Pg 3640
F.09.20421 1/2"M50×1.5Pg 4250
F.09.20482"M63×1.5Pg 4863

Sizes are taken from the 2026 product catalogue. Contact us for current stock and custom sizes.

Technical drawing

  • Liquid-Tight Conduit Fitting: Technical drawing
  • Liquid-Tight Conduit Fitting: Technical drawing

Frequently asked questions

How is flexible conduit connected to a fitting?

First choose the fitting that matches the conduit size. Cut the conduit square and deburr the cut end; on liquid-tight fittings, slide the cap and seal over the conduit, fit the ferrule into the conduit end, seat the conduit in the fitting and tighten the cap. Finally put the fitting through the hole in the enclosure and secure it from the inside with its nut. Our guide gives the steps in detail.

From the same group

Articles about this product

  • Guide3 min read

    How to connect flexible conduit to a fitting

    Flexible conduit is connected to a fitting in four steps: choose the fitting, cut the conduit, seat it and tighten the cap, then fix the fitting with its nut. For a sealed run, conduit and fitting must share the same protection class.

  • Guide3 min read

    Liquid-tight conduit: where and why it is used

    Liquid-tight conduit is galvanized flexible steel conduit enclosed in a thick PVC or halogen-free jacket, rated IP66–IP69. It is used wherever cables meet water, dust, petrol or solvents.

  • Technical3 min read

    What does IP68 mean? IP ratings explained

    In an IP code the first digit is protection against dust and solid objects, the second against water. IP68 means fully dust-tight and able to withstand continuous immersion.

Let us choose the right conduit for your project together

Send us the item code, size and quantity, and we will prepare your quote.