Skip to content
Fleks
Steel Conduit Fitting

Images are for illustration; refer to the table for dimensions.

Conduit Fittings

Steel Conduit Fitting

Straight male fitting that connects steel conduit to an enclosure or device. Fixed and swivel types; NPT, metric and PG threads.

  • IP54
  • −30 °C / +100 °C
  • M12–M63
  • CE
  • Internal type, for indoor use
  • Fixed or swivel thread
  • Body and ferrule in nickel-plated brass
  • O-ring: NBR (nitrile rubber)
  • Female (pipe-type) thread made on request

Technical data

Operating temperature
−30 °C / +100 °C
Protection rating
IP54
Material
Nickel-plated brass
Size range
M12–M63
Certificates
CE

About this product

The steel conduit fitting is a straight male fitting that connects Galvanized Steel Flexible Conduit, Stainless Steel Flexible Conduit and the guide-wire type to an enclosure, junction box or equipment housing. Its body and ferrule are nickel-plated brass and its O-ring NBR; it is rated IP54, works from −30 °C to +100 °C and is for indoor use. It comes in fixed and swivel types with NPT, metric (M12–M63) and PG threads; a female thread is made on request.

Size table

The + button at the start of a row adds that size to your quote list. You set the quantity on the quote page.

Fixed type9 sizes

Steel Conduit Fitting, Fixed type: size table
Item codeNPTMetricPGConduit size
F.08.1007—M12×1.5Pg 710
F.08.10091/4"M16×1.5Pg 912
F.08.10113/8"M16×1.5Pg 1116
F.08.10161/2"M20×1.5Pg 1620
F.08.10213/4"M25×1.5Pg 2125
F.08.10291"M32×1.5Pg 2932
F.08.10361 1/4"M40×1.5Pg 3640
F.08.10421 1/2"M50×1.5Pg 4250
F.08.10482"M63×1.5Pg 4863

Swivel type9 sizes

Steel Conduit Fitting, Swivel type: size table
Item codeNPTMetricPGConduit size
F.08.2007—M12×1.5Pg 710
F.08.20091/4"M16×1.5Pg 912
F.08.20113/8"M16×1.5Pg 1116
F.08.20161/2"M20×1.5Pg 1620
F.08.20213/4"M25×1.5Pg 2125
F.08.20291"M32×1.5Pg 2932
F.08.20361 1/4"M40×1.5Pg 3640
F.08.20421 1/2"M50×1.5Pg 4250
F.08.20482"M63×1.5Pg 4863

Sizes are taken from the 2026 product catalogue. Contact us for current stock and custom sizes.

Frequently asked questions

How is flexible conduit connected to a fitting?

First choose the fitting that matches the conduit size. Cut the conduit square and deburr the cut end; on liquid-tight fittings, slide the cap and seal over the conduit, fit the ferrule into the conduit end, seat the conduit in the fitting and tighten the cap. Finally put the fitting through the hole in the enclosure and secure it from the inside with its nut. Our guide gives the steps in detail.

From the same group

Articles about this product

  • Guide5 min read

    Flexible steel conduit sizes: inch, ID and OD table

    Flexible steel conduit is made in 18 sizes from 1/4" to 4" and is chosen by its inner diameter: 1/2" conduit, for example, is 16 mm inside and 20 mm outside. The inch value is a name; conduit, fittings and clamps are matched by their millimetre dimensions.

  • Guide3 min read

    How to connect flexible conduit to a fitting

    Flexible conduit is connected to a fitting in four steps: choose the fitting, cut the conduit, seat it and tighten the cap, then fix the fitting with its nut. For a sealed run, conduit and fitting must share the same protection class.

  • Guide3 min read

    Galvanized or stainless steel conduit? A comparison

    Galvanized flexible steel conduit works from −50 °C to +300 °C and covers most general installations. Stainless steel conduit works from −100 °C to +600 °C and is made for corrosive environments. The choice comes down to temperature, chemicals and moisture.

Let us choose the right conduit for your project together

Send us the item code, size and quantity, and we will prepare your quote.