
Images are for illustration; refer to the table for dimensions.
Flexible Steel Conduits
Galvanized Steel Flexible Conduit
Square-lock conduit wound from galvanized steel strip, with temperature resistance up to +300 °C.
- IP40
- −50 °C / +300 °C
- 1/4"–4"
- CE
- Square-lock profile at a light weight
- Considerably small bending radius
- Smooth inner surface for easy cable pulling
Technical data
- Operating temperature
- −50 °C / +300 °C
- Protection rating
- IP40
- Material
- Galvanized steel
- Flexibility
- High
- Size range
- 1/4"–4"
- Certificates
- CE
About this product
Galvanized flexible steel conduit carries cables to a machine, a panel or a device in a building installation while protecting them from crushing, cuts and heat. It works from −50 °C to +300 °C and bends to a small radius. Sizes 1/4" to 3/4" come in 50-metre coils, 1" to 2" in 25-metre coils and larger sizes in 15-metre coils; it connects with the Steel Conduit Fitting.
Size table
The + button at the start of a row adds that size to your quote list. You set the quantity on the quote page.
| Item code | Nominal size | Trade size | Inner dia. (mm) | Outer dia. (mm) | Coil (m) |
|---|---|---|---|---|---|
| F.01.1009 | 9 | 1/4" | 9 | 12.5 | 50 |
| F.01.1011 | 11 | 3/8" | 11 | 15 | 50 |
| F.01.1014 | 14 | — | 14 | 18 | 50 |
| F.01.1016 | 16 | 1/2" | 16 | 20 | 50 |
| F.01.1018 | 18 | — | 18 | 22 | 50 |
| F.01.1021 | 21 | 3/4" | 21 | 25 | 50 |
| F.01.1026 | 26 | 1" | 26 | 30 | 25 |
| F.01.1029 | 29 | — | 29 | 34 | 25 |
| F.01.1032 | 32 | — | 32 | 37 | 25 |
| F.01.1035 | 35 | 1 1/4" | 35 | 40 | 25 |
| F.01.1037 | 37 | — | 37 | 41 | 25 |
| F.01.1040 | 40 | 1 1/2" | 40 | 45 | 25 |
| F.01.1042 | 42 | — | 42 | 47 | 25 |
| F.01.1045 | 45 | — | 45 | 51 | 25 |
| F.01.1050 | 50 | 2" | 50 | 55 | 25 |
| F.01.1063 | 63 | 2 1/2" | 63 | 67 | 15 |
| F.01.1075 | 75 | 3" | 75 | 81 | 15 |
| F.01.1100 | 100 | 4" | 102 | 110 | 15 |
Sizes are taken from the 2026 product catalogue. Contact us for current stock and custom sizes.
Technical drawing
Frequently asked questions
What is the difference between galvanized and stainless conduit?
The difference is operating temperature and corrosion resistance. Galvanized steel is used from −50 °C to +300 °C and stainless steel (304/316L) from −100 °C to +600 °C. Stainless is preferred in corrosive environments.
How do I choose the conduit size?
The size is chosen by the conduit's inner diameter: the cable or bundle must pass through and be pulled without strain. Look at the inner diameter in millimetres in the table, not at the trade size in inches; the 1/2" galvanized steel conduit, for example, has a 16 mm inner diameter. On long runs with bends, the next size up or a guide-wire type makes the job easier.
From the same group

- IP40

- IP40
Articles about this product

Guide5 min read
Flexible steel conduit sizes: inch, ID and OD table
Flexible steel conduit is made in 18 sizes from 1/4" to 4" and is chosen by its inner diameter: 1/2" conduit, for example, is 16 mm inside and 20 mm outside. The inch value is a name; conduit, fittings and clamps are matched by their millimetre dimensions.

Guide3 min read
How to connect flexible conduit to a fitting
Flexible conduit is connected to a fitting in four steps: choose the fitting, cut the conduit, seat it and tighten the cap, then fix the fitting with its nut. For a sealed run, conduit and fitting must share the same protection class.

Guide3 min read
Galvanized or stainless steel conduit? A comparison
Galvanized flexible steel conduit works from −50 °C to +300 °C and covers most general installations. Stainless steel conduit works from −100 °C to +600 °C and is made for corrosive environments. The choice comes down to temperature, chemicals and moisture.
Let us choose the right conduit for your project together
Send us the item code, size and quantity, and we will prepare your quote.


